NX09 Type C Bluetooth FM Transmitter
- 【Fast Chargers for Any Devices】: This radio car adapter comes with both USB-C and 5V 2.4A USB-A charging port to charge USB-C and standard USB phones and tablets. The Power Delivery technology provides a blazing-fast charge to USB-C devices.
- 【Clear Hands Free Calls 】: Bluetooth 5.0 provides a stable connection. Nulaxy noise-cancellation technology dampens the road noise & gives you clear, crisp sound for hands free calls.
- 【Music Streaming】: You can stream music directly from your phone to car radio via Bluetooth / microSD card (≤32GB) / USB flash drive (≤32GB). 7 colors led backlit lights are a nice way to match the colors already in your car. Note only WMA MP3 WAV APE FLAC music formats in USB flash drive or microSD card are supported.
- 【Bring Voice Service to Your Car】: You can get info via voice guidance, like pairing instructions, status updates , incoming phone number. You also can stay fully focused on the road by using Siri or Google Assistant to make phone calls, send texts or get driving directions.
- 【Safety Feature】: NX09 is equipped with a voltmeter to show you the condition of your car battery. Voltage should be between 13. 2V to 14. 7V when your car is on and moving. 12. 2V to 12. 8V when your car is parked and ignition is off.
Step 1: Please try to clear your Bluetooth pairing list on your phone;
Step 2: Turn off Bluetooth on your phone, then turn it back on;
Step 3: Unplug the FM transmitter and plug it again.
Step 4: When the display is on (please start the car engine so the transmitter will be powered on), find the FM transmitter on your Bluetooth setting and tap on your phone to start pairing again. The device name of the FM transmitter is usually the model number.
It may fail to connect if the Bluetooth name of your phone is too long. At this point, you might need to shorten the Bluetooth name to let it be paired.
Note: Please be noted that the FM transmitter can only connect to one device at the same time.
Step 1: Please check if both the car radio and transmitter are on the SAME station. If not, please set both of them on the same station.
Step 2: If there are statics when you listen to music, the key really to find a vacancy frequency which is an isolated fully static (sounds awful but keep going) station before you match the transmitter to the full static radio station. For example, one works best on low frequencies (Colorado) 88.9 or so. The high frequencies (102.5+) do not work as well.
Step 3: Turning up the volume of fm transmitter and your phone, then turning down the volume of the car radio below to level to achieve better sound quality.